JALTEST DIAGNOSTICS - Repair good, repair better, repair with the best

Tachograph Programmer CD400

Calibrates and programs all analogue and digital tachographs up to the Smart tachograph

Tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver

Functions

• W figure determination on measuring track (with optional photo-cell) or rolling road.
• K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
• Parameter programming including IMS (Independent Motion Signal) and VDO counter.
• Speed simulation and customizable automatic test diagram.
• DTCS reading (Digital) and erasing.
• Sensor pairing (KITAS activation).
• Clock accuracy test.
• Workshop card’s PIN recording and input through CD400.

Abrites is a leading company in the world of aftermarket diagnostic equipment for the automotive industry. Abrites providing diagnostics, key programming, and electronic module replacement solutions for various vehicles, including cars, bikes, water scooters, snowmobiles, ATVs, trucks, and heavy-duty equipment. Abrites’ products are a result of their continuous development and dedication to excellence since 2005.

Abrites’ automotive solutions offer OEM-level diagnostic equipment to independent workshops and locksmith specialists worldwide. achieve the impossible by providing high-end working solutions for automotive professionals and enthusiasts alike.

Abrites Key Programing Specialist

MN031 - DAS Manager For Mercedes-Benz Trucks and Buses

• Spare key programming
• ALL KEYS LOST

for all infrared-based trucks up to 2020 and selected buses based on the MB platform

• Module replacement – EIS/EZS, ECU (MCM), TCU (TCM)

Trucks

• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos

Tachograph Simulator, designed to provide a realistic and reliable solution for testing and simulating tachograph systems. Tachographs are electronic devices used in commercial vehicles to record and monitor driver activities, such as driving time, rest periods, and speed.

The DTCOSIM Tachograph Simulator offers a range of features and functionalities to simulate various scenarios and test the performance of tachograph systems. Here are some key aspects :

The simulator is a device that is used as a replacement for a tachograph in vehicles where a tachograph is not mandatory, but the existing installation requires signals generated by the tachograph.

DTCOSIM Tachograph Simulator is a powerful tool for testing, validating, and optimizing tachograph systems. It provides a realistic simulation environment, ensuring that tachographs function accurately, comply with regulations, and meet the requirements of commercial vehicle operations.

ECU TUNING PLATFORM

All the tools developed by Dimsport are available in both master and slave configuration. The vehicle range supported includes CAR, BIKE, LCV , TRUCK , AGRI (tractors and agricultural vehicles) and MARINE;

THE GENIUS

TheGenius is innovation, speed, and safety in a single tool. As Dimsport’s flagship product, it’s designed to redefine ECU programming: an innovative device that works without a PC or Internet connection, ensuring
full operability anywhere. Created for the most demanding professionals, it merges the functionalities of New Genius and New Trasdata into one solution, delivering a simpler, faster, and safer working experience.

New Genius

The stand alone device for the serial communication with the Engine Control Unit (ECU), through the vehicle OBDII socket or via specific diagnostic connectors

New Trasdata

A unique tool supporting all microprocessors utilized by any kind of vehicles , for reading and programming operations in BDM, BOOT, JTAG, NBD and BAM mode

Truck Explorer Middle East is the unique worldwide leading solution for special operations on Mercedes, MAN, IVECO, Freightliner, BharatBenz, Mitsubishi Fuso, Foton, Tadano, Grove, MAZ, KAMAZ, CLAAS, BELL, PONSSE, UNIMOG, Western Star, Detroit Diesel, VW and other trucks and buses.

VEI device enables you to read/write full memory (FLASH / EEPROM) of ECU, clone ECU, make IMMO OFF, program new keys, change speed / torque limit, calculate access codes (VeDoc (X1, X2, X8), FDOK (XT, XN), DAS password) in a time and cost efficient manner.Chiptuning, Immobilizer OFF, Deactivate DTCs by ECU. ECU Cloning without soldering. Operations can be done via OBD2 or by direct connection (see DirectConnect 2U tool), as well. All licenses are lifetime. The VEI device will work all the time. With the annual Update/support subscription, you will get our support and updates, as well as get special offers and gifts from us. Valid subscription is required in order to purchase additional licenses.

Tachograph Programmer CD400

Calibrates and programs all analogue and digital tachographs up to the Smart tachograph

Tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver

Functions

• W figure determination on measuring track (with optional photo-cell) or rolling road.
• K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
• Parameter programming including IMS (Independent Motion Signal) and VDO counter.
• Speed simulation and customizable automatic test diagram.
• DTCS reading (Digital) and erasing.
• Sensor pairing (KITAS activation).
• Clock accuracy test.
• Workshop card’s PIN recording and input through CD400.

Abrites is a leading company in the world of aftermarket diagnostic equipment for the automotive industry. Abrites providing diagnostics, key programming, and electronic module replacement solutions for various vehicles, including cars, bikes, water scooters, snowmobiles, ATVs, trucks, and heavy-duty equipment. Abrites’ products are a result of their continuous development and dedication to excellence since 2005.

Abrites’ automotive solutions offer OEM-level diagnostic equipment to independent workshops and locksmith specialists worldwide. achieve the impossible by providing high-end working solutions for automotive professionals and enthusiasts alike.

Abrites Key Programing Specialist

MN031 - DAS Manager For Mercedes-Benz Trucks and Buses

• Spare key programming
• ALL KEYS LOST

for all infrared-based trucks up to 2020 and selected buses based on the MB platform

• Module replacement – EIS/EZS, ECU (MCM), TCU (TCM)

Trucks

• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos

Tachograph Simulator, designed to provide a realistic and reliable solution for testing and simulating tachograph systems. Tachographs are electronic devices used in commercial vehicles to record and monitor driver activities, such as driving time, rest periods, and speed.

The DTCOSIM Tachograph Simulator offers a range of features and functionalities to simulate various scenarios and test the performance of tachograph systems. Here are some key aspects :

The simulator is a device that is used as a replacement for a tachograph in vehicles where a tachograph is not mandatory, but the existing installation requires signals generated by the tachograph.

DTCOSIM Tachograph Simulator is a powerful tool for testing, validating, and optimizing tachograph systems. It provides a realistic simulation environment, ensuring that tachographs function accurately, comply with regulations, and meet the requirements of commercial vehicle operations.