Abrites is a leading company in the world of aftermarket diagnostic equipment for the automotive industry. Abrites providing diagnostics, key programming, and electronic module replacement solutions for various vehicles, including cars, bikes, water scooters, snowmobiles, ATVs, trucks, and heavy-duty equipment. Abrites’ products are a result of their continuous development and dedication to excellence since 2005.

Abrites’ automotive solutions offer OEM-level diagnostic equipment to independent workshops and locksmith specialists worldwide. achieve the impossible by providing high-end working solutions for automotive professionals and enthusiasts alike.

Abrites Key Programing Specialist

MN031 - DAS Manager For Mercedes-Benz Trucks and Buses

The MN031 license is developed by the Abrites team for procedures related to the vehicle’s Immobiliser. This functionality allows various procedures to be performed on the Mercedes-Benz truck range of vehicles, as well as buses, based on the Mercedes-Benz platform, as well as Setra vehicles using Infrared keys. These include:

• Spare key programming
• ALL KEYS LOST

for all infrared-based trucks up to 2020 and selected buses based on the MB platform

• Module replacement – EIS/EZS, ECU (MCM), TCU (TCM)

– Module reset (virgin)

– Read/write coding

– Personalisation

– Activation

Supported vehicles include:

Trucks

• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos

(and other models from the truck range with IR keys)

Buses

• Mercedes-Benz Travego
• Mercedes-Benz Tourismo 3rd Generation
• Setra with IR keys

(and other models from the buses range with IR keys)

In order to complete the key programming procedure, you will need the ZN003 Abrites PROTAG V2 Programmer, the TA69 Abrites Infra-red key for Mercedes trucks, the ZN051 Abrites Distribution box, as well as the ZN075 Abrites IR-adapter for Mercedes trucks. The ZN075 is used for password reading during key programming. In All Keys Lost situations the CB022 jumper cable is also required. The CB025 – Extension Cable for DS Box Relay is required to connect the EZS with the fuse, when the distance between them is big.
An AVDI and active AMS are required to purchase and use this product.

Tachograph Programmer CD400

Calibrates and programs all analogue and digital tachographs up to the Smart tachograph

Tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver

Functions

• W figure determination on measuring track (with optional photo-cell) or rolling road.
• K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
• Parameter programming including IMS (Independent Motion Signal) and VDO counter.
• Speed simulation and customizable automatic test diagram.
• DTCS reading (Digital) and erasing.
• Sensor pairing (KITAS activation).
• Clock accuracy test.
• Workshop card’s PIN recording and input through CD400.

ECU TUNING PLATFORM

All the tools developed by Dimsport are available in both master and slave configuration. The vehicle range supported includes CAR, BIKE, LCV (light commercial vehicles), TRUCK (heavy duty trucks), AGRI (tractors and agricultural vehicles) and MARINE; the widest offer in the tuning market thanks to Dimsport branches, R&D centres and commercial partners all over the world.

New Genius

The stand alone device for the serial communication with the Engine Control Unit (ECU), through the vehicle OBDII socket or via specific diagnostic connectors

New Trasdata

A unique tool supporting all microprocessors utilized by any kind of vehicles , for reading and programming operations in BDM, BOOT, JTAG, NBD and BAM mode

Truck Explorer Middle East is the unique worldwide leading solution for special operations on Mercedes, MAN, IVECO, Freightliner, BharatBenz, Mitsubishi Fuso, Foton, Tadano, Grove, MAZ, KAMAZ, CLAAS, BELL, PONSSE, UNIMOG, Western Star, Detroit Diesel, VW and other trucks and buses.

VEI device enables you to read/write full memory (FLASH / EEPROM) of ECU, clone ECU, make IMMO OFF, program new keys, change speed / torque limit, calculate access codes (VeDoc (X1, X2, X8), FDOK (XT, XN), DAS password) in a time and cost efficient manner.Chiptuning, Immobilizer OFF, Deactivate DTCs by ECU. ECU Cloning without soldering. Operations can be done via OBD2 or by direct connection (see DirectConnect 2U tool), as well. All licenses are lifetime. The VEI device will work all the time. With the annual Update/support subscription, you will get our support and updates, as well as get special offers and gifts from us. Valid subscription is required in order to purchase additional licenses.Some operations have a cost in tokens. Tokens are used offline, and must be purchased in advance.

Supported ECU of a trucks: MR (PLD), MR2, MCM, MCM2, MCM2.1, ACM2, ACM2.1, ACM2.2, TCM, EIS, FR, CPC, CPC3, CPC3Evo, CPC4, ADM3, GS2; FFR, PTM, EDC7C32, EDC17CV42, EDC7UC31, EDC17CV41, VCM2, VCM3, COO7 and other.We want you to be happy with your investment, so please read carefully or ask us about operations for each ECU before making purchase.

Abrites is a leading company in the world of aftermarket diagnostic equipment for the automotive industry. Abrites providing diagnostics, key programming, and electronic module replacement solutions for various vehicles, including cars, bikes, water scooters, snowmobiles, ATVs, trucks, and heavy-duty equipment. Abrites’ products are a result of their continuous development and dedication to excellence since 2005.

Abrites’ automotive solutions offer OEM-level diagnostic equipment to independent workshops and locksmith specialists worldwide. achieve the impossible by providing high-end working solutions for automotive professionals and enthusiasts alike.

Abrites Key Programing Specialist

MN031 - DAS Manager For Mercedes-Benz Trucks and Buses

The MN031 license is developed by the Abrites team for procedures related to the vehicle’s Immobiliser. This functionality allows various procedures to be performed on the Mercedes-Benz truck range of vehicles, as well as buses, based on the Mercedes-Benz platform, as well as Setra vehicles using Infrared keys. These include:

• Spare key programming
• ALL KEYS LOST

for all infrared-based trucks up to 2020 and selected buses based on the MB platform

• Module replacement – EIS/EZS, ECU (MCM), TCU (TCM)

– Module reset (virgin)

– Read/write coding

– Personalisation

– Activation

Supported vehicles include:

Trucks

• Mercedes-Benz Actros
• Mercedes-Benz Arocs
• Mercedes-Benz Antos

(and other models from the truck range with IR keys)

Buses

• Mercedes-Benz Travego
• Mercedes-Benz Tourismo 3rd Generation
• Setra with IR keys

(and other models from the buses range with IR keys)

In order to complete the key programming procedure, you will need the ZN003 Abrites PROTAG V2 Programmer, the TA69 Abrites Infra-red key for Mercedes trucks, the ZN051 Abrites Distribution box, as well as the ZN075 Abrites IR-adapter for Mercedes trucks. The ZN075 is used for password reading during key programming. In All Keys Lost situations the CB022 jumper cable is also required. The CB025 – Extension Cable for DS Box Relay is required to connect the EZS with the fuse, when the distance between them is big.
An AVDI and active AMS are required to purchase and use this product.

Tachograph Programmer CD400

Calibrates and programs all analogue and digital tachographs up to the Smart tachograph

Tachograph is a device that measures and records the speed and distance driven by a vehicle. The data are recorded in the form of graphics on a paper disk.The new digital tachographs record those data on its embedded memory and also on the smartcard of the driver

Functions

• W figure determination on measuring track (with optional photo-cell) or rolling road.
• K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
• Parameter programming including IMS (Independent Motion Signal) and VDO counter.
• Speed simulation and customizable automatic test diagram.
• DTCS reading (Digital) and erasing.
• Sensor pairing (KITAS activation).
• Clock accuracy test.
• Workshop card’s PIN recording and input through CD400.